https://drive.google.com/file/d/107kTrNO3BHI6ApPVBxDuyktZrRhjazqV/view?usp=sharing
Insert the USB drive with the firmware.
Click on "Tools" — "About" — "Renewable system" to start the automatic update
I provide you with my Orcaslicer profile for your Sidewinder X4 Plus
The screen can freeze and the image is not supported by artillery with this slicer.
Prints exemple:
You can download my printer.cfg Please note that you have to redo all the Z-offset, leveling etc...
X4 Pro: https://drive.google.com/file/d/1uTOqfRErMxihiJ_Vys_JdO44f94fX6zy/view
X4 Plus: https://drive.google.com/file/d/1LoE4GLe6Z-E5a2HSxtbjLrdTVquUn6mr/view
To add a webcam, you can use my configuration file.
You'll also need to connect to the printer via ssh.
user: mks
password: makerbase
execute the following commands:
sudo systemctl enable webcamd.service
sudo systemctl start webcamd.service
Also activate the camera in Fluiid
Coming Soon
X4 Pro Image file: https://drive.google.com/file/d/1uTOqfRErMxihiJ_Vys_JdO44f94fX6zy/view
X4 Plus Image file: https://drive.google.com/file/d/1uTOqfRErMxihiJ_Vys_JdO44f94fX6zy/view
You will need an emmc usb adapter: https://fr.aliexpress.com/item/1005006279363979.html?spm=a2g0o.order_list.order_list_main.5.159c5e5bx7BVWI&gatewayAdapt=glo2fra
You will need the etcher software: https://etcher.balena.io/
Remove the sidewinder cover and recover the EMMC by removing the 2 screws.
Plug it into the EMMC adapter and connect it to your computer.
Using the etcher software, attach the EMMC to your printer's system.