Add ssltransport for robovacs by rytilahti · Pull Request #943 · python-kasa/python-kasa

rytilahti · 2024-06-02T14:01:15Z

This PR implements a clear-text, token-based transport protocol seen on RV30 Plus (#937).

Client sends {"username": "email@example.com", "password": md5(password)} and gets back a token in the response
Rest of the communications are done with POST at /app?token=<token>

TBD:

Figure out how to detect these devices, e.g., the robovac reports to use AES even when it doesn't
Decide if ssl verification should be always disabled, or if we need to make this configurable
Cleanup commented out leftovers from aestransport
Tests
Improve tests: error conditions (login failures, ..)

codecov · 2024-06-02T14:03:08Z

Codecov Report

Attention: Patch coverage is 96.00000% with 5 lines in your changes missing coverage. Please review.

Project coverage is 92.20%. Comparing base (d122b48) to head (8d78a29).
Report is 136 commits behind head on master.

Files with missing lines	Patch %	Lines
kasa/transports/ssltransport.py	97.41%	2 Missing and 1 partial ⚠️
kasa/smart/smartdevice.py	0.00%	1 Missing and 1 partial ⚠️

Additional details and impacted files

@@            Coverage Diff             @@
##           master     #943      +/-   ##
==========================================
+ Coverage   92.13%   92.20%   +0.06%     
==========================================
  Files         119      120       +1     
  Lines        7619     7744     +125     
  Branches      794      805      +11     
==========================================
+ Hits         7020     7140     +120     
- Misses        441      444       +3     
- Partials      158      160       +2

☔ View full report in Codecov by Sentry.
📢 Have feedback on the report? Share it here.

kasa/cleartexttransport.py

kasa/deviceconfig.py

rytilahti · 2024-10-14T23:01:15Z

Needs investigated if the protocol is the same (or very similar) to one proposed in #1165. If yes, this can probably be closed in favor of that PR.

kasa/transports/ssltransport.py

sdb9696

Some minor nits.

Also need to add:

"SMART.TAPOROBOVAC": SmartDevice, to device_factory.get_device_class_from_family

and

SmartRobovac= "SMART.TAPOROBOVAC" to DeviceFamily

and update SmartDevice._get_device_type_from_components to return DeviceType.RoboVac appropriately.

Is it worth adding the new get methods from #937 to dump_devinfo as extra_calls or better still to helpers.smartrequests.py under new clean and map components?

kasa/device_factory.py

kasa/deviceconfig.py

kasa/httpclient.py

kasa/transports/ssltransport.py

rytilahti · 2024-11-30T14:51:40Z

This should be now ready for review, #1322 needs to be merged first and this then rebased on top of the master prior merging.

rytilahti · 2024-11-30T14:58:51Z

kasa/transports/ssltransport.py

+    def _session_expired(self) -> bool:
+        """Return true if session has expired."""
+        return (
+            self._session_expire_at is None
+            or self._session_expire_at - time.time() <= 0
+        )


It's unclear if the tokens ever expire, so we can either keep this as-is, or remove the complete session expired handling (and hope that the device reports with an error to retrigger login).

Opinions on that? Not having _session_expired() would clean up the code a bit.

rytilahti · 2024-11-30T15:00:04Z

kasa/transports/ssltransport.py

+            except Exception as ex:
+                raise KasaException(


I'm having second thoughts on whether we should be wrapping unexpected exceptions like this, as letting it blow would be a clearer indication that something is off.

So in HA we catch KasaException in order to ensure we always conform with the quality requirement to only raise HomeAssistantError. (It might not be a requirement anymore with the latest quality scale but haven’t checked)

sdb9696

LGTM. I think we can simplify get_protocol in a subsequent PR.

@Puxtril

## [0.9.0](https://github.com/python-kasa/python-kasa/tree/0.9.0) (2024-12-21) [Full Changelog](0.8.1...0.9.0) **Release highlights:** - Improvements to Tapo camera support: - C100, C225, C325WB, C520WS and TC70 now supported. - Support for motion, person, tamper, and baby cry detection. - Initial support for Tapo robovacs. - API extended with `FeatureAttributes` for consumers to test for [supported features](https://python-kasa.readthedocs.io/en/stable/topics.html#modules-and-features). - Experimental support for Kasa cameras[^1] [^1]: Currently limited to devices not yet provisioned via the Tapo app - Many thanks to @Puxtril! **Breaking changes:** - Use DeviceInfo consistently across devices [\#1338](#1338) (@sdb9696) **Implemented enhancements:** - Add rssi and signal\_level to smartcam [\#1392](#1392) (@sdb9696) - Add smartcam detection modules [\#1389](#1389) (@sdb9696) - Add bare-bones matter modules to smart and smartcam devices [\#1371](#1371) (@sdb9696) - Add bare bones homekit modules smart and smartcam devices [\#1370](#1370) (@sdb9696) - Return raw discovery result in cli discover raw [\#1342](#1342) (@sdb9696) - cli: print model, https, and lv for discover list [\#1339](#1339) (@rytilahti) - Improve overheat reporting [\#1335](#1335) (@rytilahti) - Provide alternative camera urls [\#1316](#1316) (@sdb9696) - Add LinkieTransportV2 and basic IOT.IPCAMERA support [\#1270](#1270) (@Puxtril) - Add ssltransport for robovacs [\#943](#943) (@rytilahti) **Fixed bugs:** - Tapo H200 Hub does not work with python-kasa [\#1149](#1149) - Treat smartcam 500 errors after handshake as retryable [\#1395](#1395) (@sdb9696) - Fix lens mask required component and state [\#1386](#1386) (@sdb9696) - Add LensMask module to smartcam [\#1385](#1385) (@sdb9696) - Do not error when accessing smart device\_type before update [\#1319](#1319) (@sdb9696) - Fallback to other module data on get\_energy\_usage errors [\#1245](#1245) (@rytilahti) **Added support for devices:** - Add P210M\(US\) 1.0 1.0.3 fixture [\#1399](#1399) (@sdb9696) - Add C225\(US\) 2.0 1.0.11 fixture [\#1398](#1398) (@sdb9696) - Add P306\(US\) 1.0 1.1.2 fixture [\#1396](#1396) (@nakanaela) - Add TC70 3.0 1.3.11 fixture [\#1390](#1390) (@sdb9696) - Add C325WB\(EU\) 1.0 1.1.17 Fixture [\#1379](#1379) (@sdb9696) - Add C100 4.0 1.3.14 Fixture [\#1378](#1378) (@sdb9696) - Add KS200 \(US\) IOT Fixture and P115 \(US\) Smart Fixture [\#1355](#1355) (@ZeliardM) - Add C520WS camera fixture [\#1352](#1352) (@Happy-Cadaver) **Documentation updates:** - Update docs for Tapo Lab Third-Party compatibility [\#1380](#1380) (@sdb9696) - Add homebridge-kasa-python link to README [\#1367](#1367) (@rytilahti) - Update docs for new FeatureAttribute behaviour [\#1365](#1365) (@sdb9696) - Add link to related homeassistant-tapo-control [\#1333](#1333) (@rytilahti) **Project maintenance:** - Add P135 1.0 1.2.0 fixture [\#1397](#1397) (@sdb9696) - Handle smartcam device blocked response [\#1393](#1393) (@sdb9696) - Handle KeyboardInterrupts in the cli better [\#1391](#1391) (@sdb9696) - Update C520WS fixture with new methods [\#1384](#1384) (@sdb9696) - Miscellaneous minor fixes to dump\_devinfo [\#1382](#1382) (@sdb9696) - Add timeout parameter to dump\_devinfo [\#1381](#1381) (@sdb9696) - Simplify get\_protocol to prevent clashes with smartcam and robovac [\#1377](#1377) (@sdb9696) - Add smartcam modules to package inits [\#1376](#1376) (@sdb9696) - Enable saving of fixture files without git clone [\#1375](#1375) (@sdb9696) - Force single for some smartcam requests [\#1374](#1374) (@sdb9696) - Add new methods to dump\_devinfo [\#1373](#1373) (@sdb9696) - Update cli, light modules, and docs to use FeatureAttributes [\#1364](#1364) (@sdb9696) - Pass raw components to SmartChildDevice init [\#1363](#1363) (@sdb9696) - Fix line endings in device\_fixtures.py [\#1361](#1361) (@sdb9696) - Update dump\_devinfo for raw discovery json and common redactors [\#1358](#1358) (@sdb9696) - Tweak RELEASING.md instructions for patch releases [\#1347](#1347) (@sdb9696) - Scrub more vacuum keys [\#1328](#1328) (@rytilahti) - Remove unnecessary check for python \<3.10 [\#1326](#1326) (@rytilahti) - Add vacuum component queries to dump\_devinfo [\#1320](#1320) (@rytilahti) - Handle missing mgt\_encryption\_schm in discovery [\#1318](#1318) (@sdb9696) - Follow main package structure for tests [\#1317](#1317) (@rytilahti)

This PR implements a clear-text, token-based transport protocol seen on RV30 Plus (python-kasa#937). - Client sends `{"username": "email@example.com", "password": md5(password)}` and gets back a token in the response - Rest of the communications are done with POST at `/app?token=<token>` --------- Co-authored-by: Steven B. <51370195+sdb9696@users.noreply.github.com>

@Puxtril

## [0.9.0](https://github.com/python-kasa/python-kasa/tree/0.9.0) (2024-12-21) [Full Changelog](python-kasa/python-kasa@0.8.1...0.9.0) **Release highlights:** - Improvements to Tapo camera support: - C100, C225, C325WB, C520WS and TC70 now supported. - Support for motion, person, tamper, and baby cry detection. - Initial support for Tapo robovacs. - API extended with `FeatureAttributes` for consumers to test for [supported features](https://python-kasa.readthedocs.io/en/stable/topics.html#modules-and-features). - Experimental support for Kasa cameras[^1] [^1]: Currently limited to devices not yet provisioned via the Tapo app - Many thanks to @Puxtril! **Breaking changes:** - Use DeviceInfo consistently across devices [\python-kasa#1338](python-kasa#1338) (@sdb9696) **Implemented enhancements:** - Add rssi and signal\_level to smartcam [\python-kasa#1392](python-kasa#1392) (@sdb9696) - Add smartcam detection modules [\python-kasa#1389](python-kasa#1389) (@sdb9696) - Add bare-bones matter modules to smart and smartcam devices [\python-kasa#1371](python-kasa#1371) (@sdb9696) - Add bare bones homekit modules smart and smartcam devices [\python-kasa#1370](python-kasa#1370) (@sdb9696) - Return raw discovery result in cli discover raw [\python-kasa#1342](python-kasa#1342) (@sdb9696) - cli: print model, https, and lv for discover list [\python-kasa#1339](python-kasa#1339) (@rytilahti) - Improve overheat reporting [\python-kasa#1335](python-kasa#1335) (@rytilahti) - Provide alternative camera urls [\python-kasa#1316](python-kasa#1316) (@sdb9696) - Add LinkieTransportV2 and basic IOT.IPCAMERA support [\python-kasa#1270](python-kasa#1270) (@Puxtril) - Add ssltransport for robovacs [\python-kasa#943](python-kasa#943) (@rytilahti) **Fixed bugs:** - Tapo H200 Hub does not work with python-kasa [\python-kasa#1149](python-kasa#1149) - Treat smartcam 500 errors after handshake as retryable [\python-kasa#1395](python-kasa#1395) (@sdb9696) - Fix lens mask required component and state [\python-kasa#1386](python-kasa#1386) (@sdb9696) - Add LensMask module to smartcam [\python-kasa#1385](python-kasa#1385) (@sdb9696) - Do not error when accessing smart device\_type before update [\python-kasa#1319](python-kasa#1319) (@sdb9696) - Fallback to other module data on get\_energy\_usage errors [\python-kasa#1245](python-kasa#1245) (@rytilahti) **Added support for devices:** - Add P210M\(US\) 1.0 1.0.3 fixture [\python-kasa#1399](python-kasa#1399) (@sdb9696) - Add C225\(US\) 2.0 1.0.11 fixture [\python-kasa#1398](python-kasa#1398) (@sdb9696) - Add P306\(US\) 1.0 1.1.2 fixture [\python-kasa#1396](python-kasa#1396) (@nakanaela) - Add TC70 3.0 1.3.11 fixture [\python-kasa#1390](python-kasa#1390) (@sdb9696) - Add C325WB\(EU\) 1.0 1.1.17 Fixture [\python-kasa#1379](python-kasa#1379) (@sdb9696) - Add C100 4.0 1.3.14 Fixture [\python-kasa#1378](python-kasa#1378) (@sdb9696) - Add KS200 \(US\) IOT Fixture and P115 \(US\) Smart Fixture [\python-kasa#1355](python-kasa#1355) (@ZeliardM) - Add C520WS camera fixture [\python-kasa#1352](python-kasa#1352) (@Happy-Cadaver) **Documentation updates:** - Update docs for Tapo Lab Third-Party compatibility [\python-kasa#1380](python-kasa#1380) (@sdb9696) - Add homebridge-kasa-python link to README [\python-kasa#1367](python-kasa#1367) (@rytilahti) - Update docs for new FeatureAttribute behaviour [\python-kasa#1365](python-kasa#1365) (@sdb9696) - Add link to related homeassistant-tapo-control [\python-kasa#1333](python-kasa#1333) (@rytilahti) **Project maintenance:** - Add P135 1.0 1.2.0 fixture [\python-kasa#1397](python-kasa#1397) (@sdb9696) - Handle smartcam device blocked response [\python-kasa#1393](python-kasa#1393) (@sdb9696) - Handle KeyboardInterrupts in the cli better [\python-kasa#1391](python-kasa#1391) (@sdb9696) - Update C520WS fixture with new methods [\python-kasa#1384](python-kasa#1384) (@sdb9696) - Miscellaneous minor fixes to dump\_devinfo [\python-kasa#1382](python-kasa#1382) (@sdb9696) - Add timeout parameter to dump\_devinfo [\python-kasa#1381](python-kasa#1381) (@sdb9696) - Simplify get\_protocol to prevent clashes with smartcam and robovac [\python-kasa#1377](python-kasa#1377) (@sdb9696) - Add smartcam modules to package inits [\python-kasa#1376](python-kasa#1376) (@sdb9696) - Enable saving of fixture files without git clone [\python-kasa#1375](python-kasa#1375) (@sdb9696) - Force single for some smartcam requests [\python-kasa#1374](python-kasa#1374) (@sdb9696) - Add new methods to dump\_devinfo [\python-kasa#1373](python-kasa#1373) (@sdb9696) - Update cli, light modules, and docs to use FeatureAttributes [\python-kasa#1364](python-kasa#1364) (@sdb9696) - Pass raw components to SmartChildDevice init [\python-kasa#1363](python-kasa#1363) (@sdb9696) - Fix line endings in device\_fixtures.py [\python-kasa#1361](python-kasa#1361) (@sdb9696) - Update dump\_devinfo for raw discovery json and common redactors [\python-kasa#1358](python-kasa#1358) (@sdb9696) - Tweak RELEASING.md instructions for patch releases [\python-kasa#1347](python-kasa#1347) (@sdb9696) - Scrub more vacuum keys [\python-kasa#1328](python-kasa#1328) (@rytilahti) - Remove unnecessary check for python \<3.10 [\python-kasa#1326](python-kasa#1326) (@rytilahti) - Add vacuum component queries to dump\_devinfo [\python-kasa#1320](python-kasa#1320) (@rytilahti) - Handle missing mgt\_encryption\_schm in discovery [\python-kasa#1318](python-kasa#1318) (@sdb9696) - Follow main package structure for tests [\python-kasa#1317](python-kasa#1317) (@rytilahti)

This PR implements a clear-text, token-based transport protocol seen on RV30 Plus (python-kasa#937). - Client sends `{"username": "email@example.com", "password": md5(password)}` and gets back a token in the response - Rest of the communications are done with POST at `/app?token=<token>` --------- Co-authored-by: Steven B. <51370195+sdb9696@users.noreply.github.com>

@Puxtril

## [0.9.0](https://github.com/python-kasa/python-kasa/tree/0.9.0) (2024-12-21) [Full Changelog](python-kasa/python-kasa@0.8.1...0.9.0) **Release highlights:** - Improvements to Tapo camera support: - C100, C225, C325WB, C520WS and TC70 now supported. - Support for motion, person, tamper, and baby cry detection. - Initial support for Tapo robovacs. - API extended with `FeatureAttributes` for consumers to test for [supported features](https://python-kasa.readthedocs.io/en/stable/topics.html#modules-and-features). - Experimental support for Kasa cameras[^1] [^1]: Currently limited to devices not yet provisioned via the Tapo app - Many thanks to @Puxtril! **Breaking changes:** - Use DeviceInfo consistently across devices [\python-kasa#1338](python-kasa#1338) (@sdb9696) **Implemented enhancements:** - Add rssi and signal\_level to smartcam [\python-kasa#1392](python-kasa#1392) (@sdb9696) - Add smartcam detection modules [\python-kasa#1389](python-kasa#1389) (@sdb9696) - Add bare-bones matter modules to smart and smartcam devices [\python-kasa#1371](python-kasa#1371) (@sdb9696) - Add bare bones homekit modules smart and smartcam devices [\python-kasa#1370](python-kasa#1370) (@sdb9696) - Return raw discovery result in cli discover raw [\python-kasa#1342](python-kasa#1342) (@sdb9696) - cli: print model, https, and lv for discover list [\python-kasa#1339](python-kasa#1339) (@rytilahti) - Improve overheat reporting [\python-kasa#1335](python-kasa#1335) (@rytilahti) - Provide alternative camera urls [\python-kasa#1316](python-kasa#1316) (@sdb9696) - Add LinkieTransportV2 and basic IOT.IPCAMERA support [\python-kasa#1270](python-kasa#1270) (@Puxtril) - Add ssltransport for robovacs [\python-kasa#943](python-kasa#943) (@rytilahti) **Fixed bugs:** - Tapo H200 Hub does not work with python-kasa [\python-kasa#1149](python-kasa#1149) - Treat smartcam 500 errors after handshake as retryable [\python-kasa#1395](python-kasa#1395) (@sdb9696) - Fix lens mask required component and state [\python-kasa#1386](python-kasa#1386) (@sdb9696) - Add LensMask module to smartcam [\python-kasa#1385](python-kasa#1385) (@sdb9696) - Do not error when accessing smart device\_type before update [\python-kasa#1319](python-kasa#1319) (@sdb9696) - Fallback to other module data on get\_energy\_usage errors [\python-kasa#1245](python-kasa#1245) (@rytilahti) **Added support for devices:** - Add P210M\(US\) 1.0 1.0.3 fixture [\python-kasa#1399](python-kasa#1399) (@sdb9696) - Add C225\(US\) 2.0 1.0.11 fixture [\python-kasa#1398](python-kasa#1398) (@sdb9696) - Add P306\(US\) 1.0 1.1.2 fixture [\python-kasa#1396](python-kasa#1396) (@nakanaela) - Add TC70 3.0 1.3.11 fixture [\python-kasa#1390](python-kasa#1390) (@sdb9696) - Add C325WB\(EU\) 1.0 1.1.17 Fixture [\python-kasa#1379](python-kasa#1379) (@sdb9696) - Add C100 4.0 1.3.14 Fixture [\python-kasa#1378](python-kasa#1378) (@sdb9696) - Add KS200 \(US\) IOT Fixture and P115 \(US\) Smart Fixture [\python-kasa#1355](python-kasa#1355) (@ZeliardM) - Add C520WS camera fixture [\python-kasa#1352](python-kasa#1352) (@Happy-Cadaver) **Documentation updates:** - Update docs for Tapo Lab Third-Party compatibility [\python-kasa#1380](python-kasa#1380) (@sdb9696) - Add homebridge-kasa-python link to README [\python-kasa#1367](python-kasa#1367) (@rytilahti) - Update docs for new FeatureAttribute behaviour [\python-kasa#1365](python-kasa#1365) (@sdb9696) - Add link to related homeassistant-tapo-control [\python-kasa#1333](python-kasa#1333) (@rytilahti) **Project maintenance:** - Add P135 1.0 1.2.0 fixture [\python-kasa#1397](python-kasa#1397) (@sdb9696) - Handle smartcam device blocked response [\python-kasa#1393](python-kasa#1393) (@sdb9696) - Handle KeyboardInterrupts in the cli better [\python-kasa#1391](python-kasa#1391) (@sdb9696) - Update C520WS fixture with new methods [\python-kasa#1384](python-kasa#1384) (@sdb9696) - Miscellaneous minor fixes to dump\_devinfo [\python-kasa#1382](python-kasa#1382) (@sdb9696) - Add timeout parameter to dump\_devinfo [\python-kasa#1381](python-kasa#1381) (@sdb9696) - Simplify get\_protocol to prevent clashes with smartcam and robovac [\python-kasa#1377](python-kasa#1377) (@sdb9696) - Add smartcam modules to package inits [\python-kasa#1376](python-kasa#1376) (@sdb9696) - Enable saving of fixture files without git clone [\python-kasa#1375](python-kasa#1375) (@sdb9696) - Force single for some smartcam requests [\python-kasa#1374](python-kasa#1374) (@sdb9696) - Add new methods to dump\_devinfo [\python-kasa#1373](python-kasa#1373) (@sdb9696) - Update cli, light modules, and docs to use FeatureAttributes [\python-kasa#1364](python-kasa#1364) (@sdb9696) - Pass raw components to SmartChildDevice init [\python-kasa#1363](python-kasa#1363) (@sdb9696) - Fix line endings in device\_fixtures.py [\python-kasa#1361](python-kasa#1361) (@sdb9696) - Update dump\_devinfo for raw discovery json and common redactors [\python-kasa#1358](python-kasa#1358) (@sdb9696) - Tweak RELEASING.md instructions for patch releases [\python-kasa#1347](python-kasa#1347) (@sdb9696) - Scrub more vacuum keys [\python-kasa#1328](python-kasa#1328) (@rytilahti) - Remove unnecessary check for python \<3.10 [\python-kasa#1326](python-kasa#1326) (@rytilahti) - Add vacuum component queries to dump\_devinfo [\python-kasa#1320](python-kasa#1320) (@rytilahti) - Handle missing mgt\_encryption\_schm in discovery [\python-kasa#1318](python-kasa#1318) (@sdb9696) - Follow main package structure for tests [\python-kasa#1317](python-kasa#1317) (@rytilahti)

This PR implements a clear-text, token-based transport protocol seen on RV30 Plus (python-kasa#937). - Client sends `{"username": "email@example.com", "password": md5(password)}` and gets back a token in the response - Rest of the communications are done with POST at `/app?token=<token>` --------- Co-authored-by: Steven B. <51370195+sdb9696@users.noreply.github.com>

@Puxtril

## [0.9.0](https://github.com/python-kasa/python-kasa/tree/0.9.0) (2024-12-21) [Full Changelog](python-kasa/python-kasa@0.8.1...0.9.0) **Release highlights:** - Improvements to Tapo camera support: - C100, C225, C325WB, C520WS and TC70 now supported. - Support for motion, person, tamper, and baby cry detection. - Initial support for Tapo robovacs. - API extended with `FeatureAttributes` for consumers to test for [supported features](https://python-kasa.readthedocs.io/en/stable/topics.html#modules-and-features). - Experimental support for Kasa cameras[^1] [^1]: Currently limited to devices not yet provisioned via the Tapo app - Many thanks to @Puxtril! **Breaking changes:** - Use DeviceInfo consistently across devices [\python-kasa#1338](python-kasa#1338) (@sdb9696) **Implemented enhancements:** - Add rssi and signal\_level to smartcam [\python-kasa#1392](python-kasa#1392) (@sdb9696) - Add smartcam detection modules [\python-kasa#1389](python-kasa#1389) (@sdb9696) - Add bare-bones matter modules to smart and smartcam devices [\python-kasa#1371](python-kasa#1371) (@sdb9696) - Add bare bones homekit modules smart and smartcam devices [\python-kasa#1370](python-kasa#1370) (@sdb9696) - Return raw discovery result in cli discover raw [\python-kasa#1342](python-kasa#1342) (@sdb9696) - cli: print model, https, and lv for discover list [\python-kasa#1339](python-kasa#1339) (@rytilahti) - Improve overheat reporting [\python-kasa#1335](python-kasa#1335) (@rytilahti) - Provide alternative camera urls [\python-kasa#1316](python-kasa#1316) (@sdb9696) - Add LinkieTransportV2 and basic IOT.IPCAMERA support [\python-kasa#1270](python-kasa#1270) (@Puxtril) - Add ssltransport for robovacs [\python-kasa#943](python-kasa#943) (@rytilahti) **Fixed bugs:** - Tapo H200 Hub does not work with python-kasa [\python-kasa#1149](python-kasa#1149) - Treat smartcam 500 errors after handshake as retryable [\python-kasa#1395](python-kasa#1395) (@sdb9696) - Fix lens mask required component and state [\python-kasa#1386](python-kasa#1386) (@sdb9696) - Add LensMask module to smartcam [\python-kasa#1385](python-kasa#1385) (@sdb9696) - Do not error when accessing smart device\_type before update [\python-kasa#1319](python-kasa#1319) (@sdb9696) - Fallback to other module data on get\_energy\_usage errors [\python-kasa#1245](python-kasa#1245) (@rytilahti) **Added support for devices:** - Add P210M\(US\) 1.0 1.0.3 fixture [\python-kasa#1399](python-kasa#1399) (@sdb9696) - Add C225\(US\) 2.0 1.0.11 fixture [\python-kasa#1398](python-kasa#1398) (@sdb9696) - Add P306\(US\) 1.0 1.1.2 fixture [\python-kasa#1396](python-kasa#1396) (@nakanaela) - Add TC70 3.0 1.3.11 fixture [\python-kasa#1390](python-kasa#1390) (@sdb9696) - Add C325WB\(EU\) 1.0 1.1.17 Fixture [\python-kasa#1379](python-kasa#1379) (@sdb9696) - Add C100 4.0 1.3.14 Fixture [\python-kasa#1378](python-kasa#1378) (@sdb9696) - Add KS200 \(US\) IOT Fixture and P115 \(US\) Smart Fixture [\python-kasa#1355](python-kasa#1355) (@ZeliardM) - Add C520WS camera fixture [\python-kasa#1352](python-kasa#1352) (@Happy-Cadaver) **Documentation updates:** - Update docs for Tapo Lab Third-Party compatibility [\python-kasa#1380](python-kasa#1380) (@sdb9696) - Add homebridge-kasa-python link to README [\python-kasa#1367](python-kasa#1367) (@rytilahti) - Update docs for new FeatureAttribute behaviour [\python-kasa#1365](python-kasa#1365) (@sdb9696) - Add link to related homeassistant-tapo-control [\python-kasa#1333](python-kasa#1333) (@rytilahti) **Project maintenance:** - Add P135 1.0 1.2.0 fixture [\python-kasa#1397](python-kasa#1397) (@sdb9696) - Handle smartcam device blocked response [\python-kasa#1393](python-kasa#1393) (@sdb9696) - Handle KeyboardInterrupts in the cli better [\python-kasa#1391](python-kasa#1391) (@sdb9696) - Update C520WS fixture with new methods [\python-kasa#1384](python-kasa#1384) (@sdb9696) - Miscellaneous minor fixes to dump\_devinfo [\python-kasa#1382](python-kasa#1382) (@sdb9696) - Add timeout parameter to dump\_devinfo [\python-kasa#1381](python-kasa#1381) (@sdb9696) - Simplify get\_protocol to prevent clashes with smartcam and robovac [\python-kasa#1377](python-kasa#1377) (@sdb9696) - Add smartcam modules to package inits [\python-kasa#1376](python-kasa#1376) (@sdb9696) - Enable saving of fixture files without git clone [\python-kasa#1375](python-kasa#1375) (@sdb9696) - Force single for some smartcam requests [\python-kasa#1374](python-kasa#1374) (@sdb9696) - Add new methods to dump\_devinfo [\python-kasa#1373](python-kasa#1373) (@sdb9696) - Update cli, light modules, and docs to use FeatureAttributes [\python-kasa#1364](python-kasa#1364) (@sdb9696) - Pass raw components to SmartChildDevice init [\python-kasa#1363](python-kasa#1363) (@sdb9696) - Fix line endings in device\_fixtures.py [\python-kasa#1361](python-kasa#1361) (@sdb9696) - Update dump\_devinfo for raw discovery json and common redactors [\python-kasa#1358](python-kasa#1358) (@sdb9696) - Tweak RELEASING.md instructions for patch releases [\python-kasa#1347](python-kasa#1347) (@sdb9696) - Scrub more vacuum keys [\python-kasa#1328](python-kasa#1328) (@rytilahti) - Remove unnecessary check for python \<3.10 [\python-kasa#1326](python-kasa#1326) (@rytilahti) - Add vacuum component queries to dump\_devinfo [\python-kasa#1320](python-kasa#1320) (@rytilahti) - Handle missing mgt\_encryption\_schm in discovery [\python-kasa#1318](python-kasa#1318) (@sdb9696) - Follow main package structure for tests [\python-kasa#1317](python-kasa#1317) (@rytilahti)

rytilahti added the enhancement New feature or request label Jun 2, 2024

github-advanced-security bot found potential problems Jun 2, 2024

View reviewed changes

kasa/cleartexttransport.py Fixed Show fixed Hide fixed

rytilahti mentioned this pull request Jun 2, 2024

Skip SSL verification #939

Closed

steveredden reviewed Jun 2, 2024

View reviewed changes

kasa/cleartexttransport.py Outdated Show resolved Hide resolved

github-advanced-security bot found potential problems Jun 2, 2024

View reviewed changes

kasa/cleartexttransport.py Fixed Show fixed Hide fixed

rytilahti mentioned this pull request Jun 2, 2024

Initial support for vacuums (clean module) #944

Merged

github-advanced-security bot found potential problems Jun 3, 2024

View reviewed changes

kasa/cleartexttransport.py Fixed Show fixed Hide fixed

sdb9696 reviewed Jun 3, 2024

View reviewed changes

kasa/cleartexttransport.py Outdated Show resolved Hide resolved

sdb9696 reviewed Jun 3, 2024

View reviewed changes

kasa/deviceconfig.py Outdated Show resolved Hide resolved

sdb9696 added the no-stale label Sep 27, 2024

rytilahti mentioned this pull request Nov 10, 2024

IPCamera EC60 (US) not discovered #1241

Closed

rytilahti force-pushed the feat/tokentransport branch from ae07538 to 69369f7 Compare November 28, 2024 15:53

github-advanced-security bot found potential problems Nov 28, 2024

View reviewed changes

kasa/transports/ssltransport.py Fixed Show fixed Hide fixed

rytilahti added 9 commits November 28, 2024 17:56

Add cleartexttransport seen on robovacs

c6f8b6c

Skip SSL verification

10a35b9

Use https, uppercase password hash and add some logging

abd784f

Convert response to json

0f87b76

Result is not stored inside response

d688fe6

Return full response dict to caller

fc9b0da

Set _session_expire_at

669a672

Minor cleanups

9b217cc

Rename cleartexttransport to ssltransport, move into transports package

8886600

rytilahti force-pushed the feat/tokentransport branch from 69369f7 to 8886600 Compare November 28, 2024 17:01

rytilahti added 3 commits November 28, 2024 20:07

slight cleanup

e88a666

Initial tests

b58685e

use kasa.json for json.dumps to fix tests (separator issue)

4aaf864

rytilahti changed the title ~~Add cleartexttransport seen on robovacs~~ Add ssltransport seen on robovacs Nov 28, 2024

sdb9696 requested changes Nov 29, 2024

View reviewed changes

rytilahti mentioned this pull request Nov 29, 2024

Add vacuum component queries to dump_devinfo #1320

Merged

1 task

Update get_protocol for login_version

91ab794

rytilahti mentioned this pull request Nov 29, 2024

Add fixtured-powered device simulator #1321

Draft

2 tasks

sdb9696 added 2 commits November 29, 2024 17:26

Fix smartcam protocol

946bf33

Merge remote-tracking branch 'upstream/master' into feat/tokentransport

fec4b3f

rytilahti changed the title ~~Add ssltransport seen on robovacs~~ Add ssltransport for robovacs Nov 29, 2024

rytilahti added 4 commits November 29, 2024 20:02

Merge branch 'master' into feat/tokentransport

a6b2c8e

Reset app_url when the state changes to login required

e3badf4

camelCase vacuum commands

964b0f1

Typefix

d1713df

rytilahti mentioned this pull request Nov 29, 2024

Add fixture for RV30 Plus #1323

Draft

Improve tests

562f6a6

rytilahti requested a review from sdb9696 November 30, 2024 14:48

Make test logging less verbose

8d78a29

rytilahti marked this pull request as ready for review November 30, 2024 14:50

rytilahti commented Nov 30, 2024

View reviewed changes

rytilahti mentioned this pull request Nov 30, 2024

Add consumables module for vacuums #1327

Merged

sdb9696 approved these changes Dec 1, 2024

View reviewed changes

rytilahti merged commit 9966c60 into master Dec 1, 2024

rytilahti deleted the feat/tokentransport branch December 1, 2024 17:06

sdb9696 mentioned this pull request Dec 21, 2024

Prepare 0.9.0 #1401

Merged

Uh oh!

Conversation

rytilahti commented Jun 2, 2024 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Uh oh!

codecov bot commented Jun 2, 2024 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Codecov Report

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

rytilahti commented Oct 14, 2024

Uh oh!

Uh oh!

sdb9696 left a comment

Choose a reason for hiding this comment

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

rytilahti commented Nov 30, 2024

Uh oh!

rytilahti Nov 30, 2024

Choose a reason for hiding this comment

Uh oh!

rytilahti Nov 30, 2024

Choose a reason for hiding this comment

Uh oh!

sdb9696 Nov 30, 2024

Choose a reason for hiding this comment

Uh oh!

sdb9696 left a comment

Choose a reason for hiding this comment

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

3 participants

rytilahti commented Jun 2, 2024 •

edited

Loading

codecov bot commented Jun 2, 2024 •

edited

Loading